>> RISK FREE 3-month IN-HOME TRIAL, best guarantee in the wood boiler industry <<

Free-standing Wood Boilers ... a solution for every situation.

B100withFrontCladding
  NanoPictureForFreeStandingPage
ClassicFrontView
TimeLessFreeStandingModelsPage
 
Model: B100
Model: Nano
Model: Classic
Model: Timeless
         

 

Model B100 specifications:

is an indoor hydronic heater that has a 50/30 heat distribution ratio. This means that around 50% of the rated heat output is radiated into the room where the unit is installed and around 30% of the rated heat output goes to the water.

B100
    High Burn* Low Burn*
Rated Heat Input BTU/Hr 133,900 73,400
Weight of cord wood Lbs 44.5 42.2
Max Wood length Inches 20
Glass Area Loading door Inches 20.25 x 13
Firebox Volume CF 4.5
   
Rated Overall Heat Output BTU/Hr 104,500 60,200
Heat to water BTU/Hr 35,000 24,000
Efficiency to water % 26 33
Heat into the room BTU/Hr 69,500 36,200
Efficiency to the room % 52 49
Overall efficiency % 78 82
Burn Time Hrs 2.33 4.1
Water Flow GPM 6.2 6.2
Max. Water Temp. F 180 160
Min. Water Temp. F 130 130
B100withFrontCladding        
Emissions*
Combustion concept Staged combustion with catalytic afterburn
Particulate Emission rate gr/Hr 12.41 3.02
Particulate Emission Factor gr/kg 1.43 0.65
Particulate Emissions Level Lb/MMBTU
CO ppm 650 125
CO2 % 10 - 11 10 - 11
O2 % 10 - 13 10 - 13
Max. Stack Temp. F 320 225
       
Water Capacity Gallons 5  
Maximum Operating Temperature F 200  
Maximum Operating Pressure PSI 30  
Test Pressure PSI 85
       
Dimensional
Height Inches 46
Depth Inches 26
Width Inches 28.5
Weight Lbs 875
Flue Collar Inches 8
Built & Tested to the following Standards ASME IV, UL391, CAN/CSA B366.1 and UL 1482
*Model B100 meets the EPA Hydronic Heater Program Phase II particulate emission level of max. 18 gr/hour. Model B100 can NOT be qualified to the EPA Hydronic Heater Program because this model can not be operated at a burn rate for Category II. Testing performed by Intertek.

Model BJ100 specifications:

is an free-standing hydronic heater that has a 20/60 heat distribution ratio. This means that around 20% of the rated heat output is radiated into the room where the unit is installed and around 60% of the rated heat output goes to the water.

   
    High Burn* Low Burn*  
Rated Heat Input BTU/Hr 125,100 68,700  
Weight of cord wood Lbs 34.2 33.5  
Max Wood length Inches 18  
Glass Area Loading door Inches 16 x 14  
Firebox Volume CF 3.5  
     
Rated Overall Heat Output BTU/Hr 102,600 55,700  
Heat to water BTU/Hr 61,600 36,200  
Efficiency to water % 60 65  
Heat into the room BTU/Hr 41,000 19,500  
Efficiency to the room % 22 16  
Overall efficiency % 82 81  
Burn Time Hrs 3.2 5.3  
Water Flow GPM 5 5  
Max. Water Temp. F 180 160  
Min. Water Temp. F 140 140  
             
Emissions*
Combustion concept Staged combustion with catalytic afterburn
Particulate Emission rate gr/Hr 9.84 2.42  
Particulate Emission Factor gr/kg 2.04 0.65  
Particulate Emissions Level Lb/MMBTU  
CO ppm 450 115  
CO2 % 10 - 11 10 - 11  
O2 % 10 - 13 10 - 13  
Max. Stack Temp. F 330 235  
         
Water Capacity Gallons 18    
Maximum Operating Temperature F 200    
Maximum Operating Pressure PSI 30    
Test Pressure PSI 85  
         
Dimensional  
Height Inches 46  
Depth Inches 22  
Width Inches 22  
Weight Lbs 625  
Flue Collar Inches 7  
Built & Tested to the following Standards ASME IV, UL391, CAN/CSA B366.1 and UL 1482
*Model B100 meets the EPA Hydronic Heater Program Phase II particulate emission level of max. 18 gr/hour. Model B100 can NOT be qualified to the EPA Hydronic Heater Program because this model can not be operated at a burn rate for Category II. Testing performed by Intertek.    

 

Model NANO: Free-standing unit for LOW ENERGY HOME or PASSIVHAUS:

The NANO is a Free-standing Hydronic Heater desinged and well suited for Low Energy Home or Passivhaus. The NANO has a 30/60 heat distribution ratio. This means that around 30% of the rated heat output is radiated into the room where the unit is installed and around 60% of the rated heat output goes to the water.

Specifications: The NANO's overall Heat Output is 30,000 BTU/hour, 20,000 BTU/hour to the water and 10,000 BTU/hour radiation/convection into the room. Perfect in combination with a Solar Hot Water system and 100 to 200 gallon storage tank.

  NanoPictureForFreeStandingPage
    High Burn* Low Burn*  
Rated Heat Input BTU/Hr 125,100 68,700  
Weight of cord wood Lbs 34.2 33.5  
Max Wood length Inches 18  
Glass Area Loading door Inches 16 x 14  
Firebox Volume CF 3.5  
     
Rated Overall Heat Output BTU/Hr 102,600 55,700  
Heat to water BTU/Hr 61,600 36,200  
Efficiency to water % 60 65  
Heat into the room BTU/Hr 41,000 19,500  
Efficiency to the room % 22 16  
Overall efficiency % 82 81  
Burn Time Hrs 3.2 5.3  
Water Flow GPM 5 5  
Max. Water Temp. F 180 160  
Min. Water Temp. F 140 140  
  CombinationWithSHW          
Emissions*  
Combustion concept Staged combustion with catalytic afterburn
Particulate Emission rate gr/Hr 9.84 2.42  
Particulate Emission Factor gr/kg 2.04 0.65  
Particulate Emissions Level Lb/MMBTU  
CO ppm 450 115  
CO2 % 10 - 11 10 - 11  
O2 % 10 - 13 10 - 13  
Max. Stack Temp. F 330 235  
         
Water Capacity Gallons 18    
Maximum Operating Temperature F 200    
Maximum Operating Pressure PSI 30    
Test Pressure PSI 85  
         
Dimensional  
Height Inches 46  
Depth Inches 22  
Width Inches 22  
Weight Lbs 625  
Flue Collar Inches 7  
Built & Tested to the following Standards ASME IV, UL391, CAN/CSA B366.1 and UL 1482
*Model B100 meets the EPA Hydronic Heater Program Phase II particulate emission level of max. 18 gr/hour. Model B100 can NOT be qualified to the EPA Hydronic Heater Program because this model can not be operated at a burn rate for Category II. Testing performed by Intertek.    

 

Model Classic specifications: TBD

is an indoor hydronic heater that has a 50/30 heat distribution ratio. This means that around 50% of the rated heat output is radiated into the room where the unit is installed and around 30% of the rated heat output goes to the water.

  ClassicFrontView
    High Burn* Low Burn*
Rated Heat Input BTU/Hr    
Weight of cord wood Lbs    
Max Wood length Inches    
Glass Area Loading door Inches    
Firebox Volume CF    
   
Rated Overall Heat Output BTU/Hr    
Heat to water BTU/Hr    
Efficiency to water %    
Heat into the room BTU/Hr    
Efficiency to the room %    
Overall efficiency %    
Burn Time Hrs    
Water Flow GPM    
Max. Water Temp. F    
Min. Water Temp. F    
           
Emissions*
Combustion concept Staged combustion with catalytic afterburn
Particulate Emission rate gr/Hr    
Particulate Emission Factor gr/kg    
Particulate Emissions Level Lb/MMBTU    
CO ppm    
CO2 %    
O2 %    
Max. Stack Temp. F    
       
Water Capacity Gallons    
Maximum Operating Temperature F    
Maximum Operating Pressure PSI    
Test Pressure PSI    
       
Dimensional    
Height Inches    
Depth Inches    
Width Inches    
Weight Lbs    
Flue Collar Inches    
Built & Tested to the following Standards ASME IV, UL391, CAN/CSA B366.1 and UL 1482
*Model B100 meets the EPA Hydronic Heater Program Phase II particulate emission level of max. 18 gr/hour. Model B100 can NOT be qualified to the EPA Hydronic Heater Program because this model can not be opereated at a burn rate for Category II. Testing performed by Intertek.

Model TimeLess specifications: TBD (Available Fall 2011)

  TimeLessFreeStandingModelsPage
    High Burn* Low Burn*
Rated Heat Input BTU/Hr    
Weight of cord wood Lbs    
Max Wood length Inches    
Glass Area Loading door Inches    
Firebox Volume CF    
   
Rated Overall Heat Output BTU/Hr    
Heat to water BTU/Hr    
Efficiency to water %    
Heat into the room BTU/Hr    
Efficiency to the room %    
Overall efficiency %    
Burn Time Hrs    
Water Flow GPM    
Max. Water Temp. F    
Min. Water Temp. F    
           
Emissions*
Combustion concept Staged combustion with catalytic afterburn
Particulate Emission rate gr/Hr    
Particulate Emission Factor gr/kg    
Particulate Emissions Level Lb/MMBTU    
CO ppm    
CO2 %    
O2 %    
Max. Stack Temp. F    
       
Water Capacity Gallons    
Maximum Operating Temperature F    
Maximum Operating Pressure PSI    
Test Pressure PSI    
       
Dimensional
Height Inches  
Depth Inches  
Width Inches  
Weight Lbs  
Flue Collar Inches  
Built & Tested to the following Standards ASME IV, UL391, CAN/CSA B366.1 and UL 1482
*Model B100 meets the EPA Hydronic Heater Program Phase II particulate emission level of max. 18 gr/hour. Model B100 can NOT be qualified to the EPA Hydronic Heater Program because this model can not be opereated at a burn rate for Category II. Testing performed by Intertek.

 

For installation schematics and user manuals, please e-mail us.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model B100 specifications:

is an indoor hydronic heater that has a 50/30 heat distribution ratio. This means that around 50% of the rated heat output is radiated into the room where the unit is installed and around 30% of the rated heat output goes to the water.

B100
    High Burn* Low Burn*
Rated Heat Input BTU/Hr 133,900 73,400
Weight of cord wood Lbs 44.5 42.2
Max Wood length Inches 20
Glass Area Loading door Inches 20.25 x 13
Firebox Volume CF 4.5
   
Rated Overall Heat Output BTU/Hr 104,500 60,200
Heat to water BTU/Hr 35,000 24,000
Efficiency to water % 26 33
Heat into the room BTU/Hr 69,500 36,200
Efficiency to the room % 52 49
Overall efficiency % 78 82
Burn Time Hrs 2.33 4.1
Water Flow GPM 6.2 6.2
Max. Water Temp. F 180 160
Min. Water Temp. F 130 130
B100withFrontCladding        
Emissions*
Combustion concept Staged combustion with catalytic afterburn
Particulate Emission rate gr/Hr 12.41 3.02
Particulate Emission Factor gr/kg 1.43 0.65
Particulate Emissions Level Lb/MMBTU
CO ppm 650 125
CO2 % 10 - 11 10 - 11
O2 % 10 - 13 10 - 13
Max. Stack Temp. F 320 225
       
Water Capacity Gallons 5  
Maximum Operating Temperature F 200  
Maximum Operating Pressure PSI 30  
Test Pressure PSI 85
       
Dimensional
Height Inches 46
Depth Inches 26
Width Inches 28.5
Weight Lbs 875
Flue Collar Inches 8
Built & Tested to the following Standards ASME IV, UL391, CAN/CSA B366.1 and UL 1482
*Model B100 meets the EPA Hydronic Heater Program Phase II particulate emission level of max. 18 gr/hour. Model B100 can NOT be qualified to the EPA Hydronic Heater Program because this model can not be operated at a burn rate for Category II. Testing performed by Intertek.

Model BJ100 specifications:

is an free-standing hydronic heater that has a 20/60 heat distribution ratio. This means that around 20% of the rated heat output is radiated into the room where the unit is installed and around 60% of the rated heat output goes to the water.

  B100
    High Burn* Low Burn*
Rated Heat Input BTU/Hr 133,900 73,400
Weight of cord wood Lbs 44.5 42.2
Max Wood length Inches 20
Glass Area Loading door Inches 20.25 x 13
Firebox Volume CF 4.5
   
Rated Overall Heat Output BTU/Hr 104,500 60,200
Heat to water BTU/Hr 35,000 24,000
Efficiency to water % 26 33
Heat into the room BTU/Hr 69,500 36,200
Efficiency to the room % 52 49
Overall efficiency % 78 82
Burn Time Hrs 2.33 4.1
Water Flow GPM 6.2 6.2
Max. Water Temp. F 180 160
Min. Water Temp. F 130 130
  B100withFrontCladding        
Emissions*
Combustion concept Staged combustion with catalytic afterburn
Particulate Emission rate gr/Hr 12.41 3.02
Particulate Emission Factor gr/kg 1.43 0.65
Particulate Emissions Level Lb/MMBTU
CO ppm 650 125
CO2 % 10 - 11 10 - 11
O2 % 10 - 13 10 - 13
Max. Stack Temp. F 320 225
       
Water Capacity Gallons 5  
Maximum Operating Temperature F 200  
Maximum Operating Pressure PSI 30  
Test Pressure PSI 85
       
Dimensional
Height Inches 46
Depth Inches 26
Width Inches 28.5
Weight Lbs 875
Flue Collar Inches 8
Built & Tested to the following Standards ASME IV, UL391, CAN/CSA B366.1 and UL 1482
*Model B100 meets the EPA Hydronic Heater Program Phase II particulate emission level of max. 18 gr/hour. Model B100 can NOT be qualified to the EPA Hydronic Heater Program because this model can not be opereated at a burn rate for Category II. Testing performed by Intertek.

 

  B100
    High Burn* Low Burn*
Rated Heat Input BTU/Hr 133,900 73,400
Weight of cord wood Lbs 44.5 42.2
Max Wood length Inches 20
Glass Area Loading door Inches 20.25 x 13
Firebox Volume CF 4.5
   
Rated Overall Heat Output BTU/Hr 104,500 60,200
Heat to water BTU/Hr 35,000 24,000
Efficiency to water % 26 33
Heat into the room BTU/Hr 69,500 36,200
Efficiency to the room % 52 49
Overall efficiency % 78 82
Burn Time Hrs 2.33 4.1
Water Flow GPM 6.2 6.2
Max. Water Temp. F 180 160
Min. Water Temp. F 130 130
         
Emissions*
Combustion concept Staged combustion with catalytic afterburn
Particulate Emission rate gr/Hr 12.41 3.02
Particulate Emission Factor gr/kg 1.43 0.65
Particulate Emissions Level Lb/MMBTU
CO ppm 650 125
CO2 % 10 - 11 10 - 11
O2 % 10 - 13 10 - 13
Max. Stack Temp. F 320 225
       
Water Capacity Gallons 5  
Maximum Operating Temperature F 200  
Maximum Operating Pressure PSI 30  
Test Pressure PSI 85
       
Dimensional
Height Inches 46
Depth Inches 26
Width Inches 28.5
Weight Lbs 875
Flue Collar Inches 8
Built & Tested to the following Standards ASME IV, UL391, CAN/CSA B366.1 and UL 1482
*Model B100 meets the EPA Hydronic Heater Program Phase II particulate emission level of max. 18 gr/hour. Model B100 can NOT be qualified to the EPA Hydronic Heater Program because this model can not be opereated at a burn rate for Category II. Testing performed by Intertek.

For installation schematics and user manuals, please e-mail us.