Solar Hot Water (SHW) Collectors:

Models comming soon

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Free-standing Unit - Model B100 specifications:

is an indoor hydronic heater that has a 50/30 heat distribution ratio. This means that around 50% of the rated heat output is radiated into the room where the unit is installed and around 30% of the rated heat output goes to the water.

 
B100
    High Burn* Low Burn*
Rated Heat Input BTU/Hr 133,900 73,400
Weight of cord wood Lbs 44.5 42.2
Max Wood length Inches 20
Glass Area Loading door Inches 20.25 x 13
Firebox Volume CF 4.5
   
Rated Overall Heat Output BTU/Hr 104,500 60,200
Heat to water BTU/Hr 35,000 24,000
Efficiency to water % 26 33
Heat into the room BTU/Hr 69,500 36,200
Efficiency to the room % 52 49
Overall efficiency % 78 82
Burn Time Hrs 2.33 4.1
Water Flow GPM 6.2 6.2
Max. Water Temp. F 180 160
Min. Water Temp. F 130 130
B100withFrontCladding        
Emissions*
Combustion concept Staged combustion with catalytic afterburn
Particulate Emission rate gr/Hr 12.41 3.02
Particulate Emission Factor gr/kg 1.43 0.65
Particulate Emissions Level Lb/MMBTU
CO ppm 650 125
CO2 % 10 - 11 10 - 11
O2 % 10 - 13 10 - 13
Max. Stack Temp. F 320 225
       
Water Capacity Gallons 5  
Maximum Operating Temperature F 200  
Maximum Operating Pressure PSI 30  
Test Pressure PSI 85
       
Dimensional
Height Inches 46
Depth Inches 26
Width Inches 28.5
Weight Lbs 875
Flue Collar Inches 8
Built & Tested to the following Standards ASME IV, UL391, CAN/CSA B366.1 and UL 1482
*Model B100 meets the EPA Hydronic Heater Program Phase II particulate emission level of max. 18 gr/hour. Model B100 can NOT be qualified to the EPA Hydronic Heater Program because this model can not be opereated at a burn rate for Category II. Testing performed by Intertek.

 

 

 

 

For installation schematics and user manuals, please e-mail us.