>> RISK FREE 3-month IN-HOME TRIAL, best guarantee in the wood boiler industry <<

Panorama Fireplace Insert - Model BJ100-Inca & BJ100-Itaca Specifications:

is a Fireplace Insert hydronic heater that has a 30/70 heat distribution ratio. This means that around 30% of the rated heat output is radiated into the room where the unit is installed and around 70% of the rated heat output goes to the water.

Specifications:

Inca100picture Inca100picture2 Itaca100basicpicture

Inca100 Itaca100basic Itaca100

 
 
    High Burn*  
Rated Heat Input BTU/Hr 153,250  
Max Weight of cord wood Lbs/hr 23  
Max Wood length Inches 28
Glass Area Loading door Inches 33 x 16
Firebox Volume CF 8
   
Rated Overall Heat Output BTU/Hr 119,500  
Heat to water BTU/Hr 80,250  
Efficiency to water % 67  
Heat into the room BTU/Hr 39,250  
Efficiency to the room % 33  
Overall efficiency % 78  
Burn Time Hrs 2.33  
Water Flow GPM 6.2  
Max. Water Temp. F 185  
Min. Water Temp. F 140  
         
Emissions*
Combustion concept Staged combustion with catalytic afterburn
Particulate Emission rate gr/Hr 14.5  
Particulate Emission Factor gr/kg 1.4  
Particulate Emissions Level Lb/MMBTU 0.27
CO ppm 950  
CO2 % 10 - 11  
O2 % 10 - 13  
Max. Stack Temp. F 350  
       
Water Capacity Gallons 19  
Maximum Operating Temperature F 185  
Maximum Operating Pressure PSI 20  
Test Pressure PSI 55
       
Dimensional
Height Inches 50
Depth Inches 28
Width Inches 41.5
Weight Lbs 755
Flue Collar Inches 10
Built & Tested to the following Standards ASME IV, UL391, CAN/CSA B366.1 and UL 1482
*Models BJ100-Inca & Itaca meet the EPA Hydronic Heater Program Phase II particulate emission level of max. 18 gr/hour. Models can NOT be qualified to the EPA Hydronic Heater Program because this model can not be opereated at a burn rate for Category II.

 

 

 

For installation schematics and user manuals, please e-mail us.